Need help? Contact one of our experts! 888.499.8866
 

You have no items in your shopping cart.

WEBSITE UNDER CONSTRUCTION

Mountaineering

Mountaineering

<

Items 1 to 10 of 13 total

Set Descending Direction

Grid  List 

  1. BLACK DIAMOND STOPPER SET PRO #1-#13

    BLACK DIAMOND STOPPER SET PRO #1-#13

    A full set of all sizes of Stoppers on a Micron carabiner to protect everything from tip seams to finger cracks. Black Diamond Stoppers are an essential for every trad rack, designed with a transverse taper that permits sideways placements in flares and shallow seams. Anodized by size, they're quickly identifiable and rounded edges make for easy removal. Each Stopper is equipped with a durable, galvanized steel cable. Durable aluminum heads and steel cables Transverse taper is versatile in flares, constrictions and parallel cracks Rounded edges for easy cleaning (smaller sizes are straight for better surface contact) *Sizes 1 and 2 are for direct aid only Learn More
    $127.95

  2. PETZL PRO TRAXION

    PETZL PRO TRAXION

    Description Loss-resistant pulley: - allows a rope to be installed when the pulley is connected to the anchor Well suited for hauling heavy loads: - large diameter aluminum sheave mounted on sealed ball bearings for excellent efficiency - side plate locks when loaded and prevents opening of the pulley during use Versatile: - lower connection point for creating different types of hauling systems - toothed cam with self-cleaning slot optimizes performance under any conditions: frozen or dirty ropes... - may be used as simple pulley by locking the cam in the raised position Specifications Weight: 265 g Certification(s): CE EN 567 Material(s): aluminum, stainless steel, nylon Min. rope diameter: 8 mm Max. rope diameter: 13 mm Sheave type: sealed ball bearings Sheave diameter: 38 mm Working load: 2 x 2,5 = 5 kN Breaking strength: 2 x 11 = 22 kN Working load as progress capture pulley: 2,5 kN Breaking strength as progress capture pulley: 4 kN Efficiency: 95 % Learn More
    $138.00

  3. PETZL MICRO TRAXION

    PETZL MICRO TRAXION

    The MICRO TRAXION is an ultra-light (85 g), ultra-compact progress-capture pulley that is exceptionally efficient (91 %) thanks to its sealed ball bearings. The cam can be locked in open position so the device can be used as a simple pulley. Learn More
    $110.00

  4. CAMP XLC NANOTECH AUTO CRAMPON
    $199.95

  5. GRIVEL G12 CRAMP-O-MATIC CRAMPON

    GRIVEL G12 CRAMP-O-MATIC CRAMPON

    A well known system which relies on a nylon speed lever in the rear and a stainless steel front bale to hold the boot. Quick to put on, these bindings are perfect for plastic mountaineering boots that have a rigid sole and substantial heel and toe welts. The stainless steel safety strap, which was invented by Grivel, is permanently mounted on the front bale and prevents total loss of the crampon should it be forced off the boot. Learn More
    $175.00

  6. GRIVEL G12 NEW MATIC CRAMPON

    GRIVEL G12 NEW MATIC CRAMPON

    An evolution of the Cramp-O-Matic system which utilises the C-O-M rear bale and lever. The plastic harness system is hinged from two front posts which retain the boot securely even if it has a shallow, worn front welt or overboots are being used. It is a simple and efficient binding, being far more versatile than the original Cramp-O-Matic style. Made in dual-component plastic: the black part is stronger, bearing the strain whilst the yellow part is softer, increasing adherence to the boot. The harness is made from the strongest, most durable plastic available -Zytel DuPont, which was developed for the manufacture of alpine ski bindings. Obviously it cannot last forever, so please, after long and severe use replace the harness the same way you would resole trekking boots or rock climbing shoes. Learn More
    $175.00

  7. GRIVEL AIR TECH LIGHT NEWMATIC CRAMPON

    GRIVEL AIR TECH LIGHT NEWMATIC CRAMPON

    An evolution of the Cramp-O-Matic system which utilises the C-O-M rear bale and lever. The plastic harness system is hinged from two front posts which retain the boot securely even if it has a shallow, worn front welt or overboots are being used. It is a simple and efficient binding, being far more versatile than the original Cramp-O-Matic style. Made in dual-component plastic: the black part is stronger, bearing the strain whilst the yellow part is softer, increasing adherence to the boot. The harness is made from the strongest, most durable plastic available -Zytel DuPont, which was developed for the manufacture of alpine ski bindings. Obviously it cannot last forever, so please, after long and severe use replace the harness the same way you would resole trekking boots or rock climbing shoes. Learn More
    $165.00

  8. OMEGA PACIFIC LINK CAM

    OMEGA PACIFIC LINK CAM

    Building on a revolutionary concept from legendary gear designer, Greg Lowe, Link Cams operate on a simple concept of trisecting a cam lobe so that, as the device is retracted, the cam unfolds and permits an amazing range for a unit of its size. Utilizing a reliable, single-axle design and with a camming ratio of over 2.5:1, Link Cams provide more range per size than any other spring-loaded camming device available! Extended range means you can leave the ground with fewer pieces on your rack; no more doubling up on pieces you think you "might" need if you're unsure where, exactly, you'll need doubles of one particular piece. Likewise, for backcountry climbers, it means packing in less gear. And as a "crux piece" you need RIGHT NOW, Link Cam's large range increases your odds of picking the right size the first time you go to your rack. Mechanically-speaking, Link Cams are as innovative as the concept behind their design. Built with a hybrid blend of materials and advanced MIM process, Link Cams are the most sophisticated and modern camming devices in the world. The two, inner links on each lobe unit are built by a modern process known as Metal-Injection-Molding which permits us to create detailed, precision pieces with increased strength and are made from 17-4 aircraft stainless steel. The outer link is machined from 7000-series aluminum alloy Although Link Cams aren't necessarily more difficult to place than other cams, they do require careful consideration to avoid damaging them or compromising the placement. Link Cams should be placed carefully and deliberately, with a critical eye and the ability to assess a proper, solid placement. If climbers aren't experienced at assessing nuances of placements, instruction should be sought before using Link Cams. Learn More
    from
    Reg. $101.95 to $113.95

  9. DMM I.M.P BRASS SET

    DMM I.M.P BRASS SET

    Named DMM's Brass Immaculate Marginal Protection Nut Set, the I.M.P. pro boasts full strength ratings at low weights. When you inevitably have to make a desperate clip, let your shakes subside with the knowledge that these color-coded wires are easily identifiable for quick placement. Slightly concaved faces make these pro pieces extra secure and ready to catch, while a double reverse taper resists rotating or wiggling. Learn More
    $109.95

  10. DMM HB BRASS OFFSET SET

    DMM HB BRASS OFFSET SET

    In slightly flared cracks, nothing does the job like an Offset. Because off their ability to protect slightly flared cracks where nothing else seems to work, the DMM HB Brass Offset Set 0-6 has garnered a faithful following in the world of heady trad routes. The color-coded aluminum swage keeps the wires parallel while allowing one wire to slide for more evenly loaded and secure placements. Angular head design is designed to seat in flared cracks and offers multiple placement options Aluminum swage keeps the wires parallel while allowing one wire to slide for a more evenly loaded and secure placement Color-coded swage provides easy size identification Brass head is more forgiving than alloy in soft and brittle rock Learn More
    $149.95

Items 1 to 10 of 13 total

Set Descending Direction

Grid  List